Panasonic DBS576 Section 700 Technical Manual page 283

Section 700 - Operation
To retrieve a call parked at the originating extension from another extension:
1. Lift the handset
2. Enter the Call Park Answer/Other Ext. access code (default
= 773).
OR...
Enter the Call Park/Floating Hold Answer feature access
code (default = *9) (Version 2.0 and higher).
3. Dial the number of the extension that parked the call.
To park a call at another extension:
1. While on a call, press the hookswitch.
2. Enter the Call Park Transfer access code (default = 774).
3. Dial the extension number to receive the parked call.
4. If necessary, page the party that needs to retrieve the call.
To retrieve a transferred call park:
1. At the extension with the transferred park call, lift the hand-
set.
2. Enter Call Park Answer/Self access code (default = 772).
Hardware Requirements
• N/A
Related Programming
• FF1 (System): Extension Park Hold Recall Timer
• FF1-0-02: Dial Control for Floating Hold Answer
Considerations
• You cannot park more than one call at a time.
• If two calls are on hold and the last call is parked, the other call is then considered the last held
call. If a transfer is performed, the remaining held call would be the call transferred, not the
parked call.
576-20-700
Action
Action
Action
DBS 576 (USA), issued January 1999
Chapter 7. SLT Features
Result
Intercom dial tone
• Connected to parked call
Result
• Intercom dial tone
Result
Intercom dial tone
• Connected to parked call
283