Panasonic DBS576 Section 700 Technical Manual page 252

Chapter 6. DSLT Features
Operation
To make an OHVA :
1. Lift the handset or press the ON/OFF key.
2. Dial the extension number.
3. Enter the OHVA feature access code (default = 8).
4. Make your announcement
To transfer a call using OHVA:
1. While on a call, press the HOLD key.
2. Dial the extension number to which the call is being trans-
ferred.
3. Enter OHVA feature access code (default = 8) and announce
the call to be transferred.
4. If transfer is: not accepted, press the FLASH key.
5. Replace the handset.
Hardware Requirements
• N/A
Related Programming
• FF1 0 03 (System): Extension COS OHVA Originate
• FF1 0 03 (System): Extension COS OHVA Receive
• FF3 (Extension): Extension COS Assignments
• FF4: FF Key Assignments
Considerations
• If Onhook Transfer is enabled, the held call is transferred as soon as the extension sending the
OHVA hangs up.
• If the transferred call is not answered immediately, it will queue for a set time limit, then return to
the extension sending the OHVA by Transfer Recall Timer.
• You cannot receive a Call Waiting message during an OHVA.
• If you make an OHVA to an SLT, the SLT user and the other party will hear the announcement.
252
Action
Action
DBS 576 (USA), issued January 1999
Section 700 - Operation
Result
Busy signal
Result
Current call on hold
Busy signal
Transfer canceled
576-20-700