Panasonic DBS576 Section 700 Technical Manual page 68

Chapter 3. System Features
Figure 1. Output data format
)RUPDW#&4
7#002''#++=00=66#++=00=66#1111#7777#GGGGGGGGGGGGGGGGGGGGGGGG#DDDDDDDDDD#YYYYY
4 5
)RUPDW#&5
7#002''#++=00=66#++=00=66#1111#7777#GGGGGGGGGGGGGGGGGGGGGGGG#DDDDDDDDDD#YYYY
4 5
GGGGGGGGGGGGGGGG#FFFFFFFF PP=VV
<
1 Condition Code: (I: Incoming call / D: DID.DDI incoming call / h: Hold incoming call / N:
Network incoming call / S:DISA incoming call / t: Transfer incoming call / A: Abandoned
Call / O: Outgoing call [Non LCR] / F: Call forward outside call / H: Hold outgoing call / L:
LCR outgoing call / T: Transfer outgoing call / W: Closed Numbering call)
2 Call start time (MM=01 to 12 / DD=01 to 31 / HH=00 to 23 / MM=00 to 59 / SS=00 to 59)
3 Call duration time (HH=00 to 23 / MM=00 to 59 / SS=00 to 59)
4 CO user No. (Extension line No.: 0 to 9999 / CO line No.: C001 to C576)
5 CO line No. (CO line No.: 001 to 576 / When CO line is disconnected while the call is on
hold: *001 to *576)
6 Dialed No. (24 digits max. including 0-9, *, # Cannot display Flash or Pause. If a number is
hidden, * will appear instead of digits. * will stay with the call even if the call is transferred.
For Format 2, an I Proceeds the digits if it is an incoming call.)
7 Accounting code (10 digits max.)/Verified Account Code (Verified Account Code table
number V001 to V500)
8 DISA Security Code ID (DISA ID Code table number D001-D016)
9 Caller data (Format #2 only)
ISDN charge data (Format #2 only - originator number applies to ISDN only) - Not used
10
(Format # 2 only) Future Use
Incoming Ringing Time (Format #2 only) (MM=00 to 99 / SS=00 to 59)
11
Carriage return line feed
H
Related Programming
• FF2: SMDR for Outbound Calls (for Analog, E&M Tie Line, and ISDN)
• FF2: SMDR for Inbound Calls (for Analog, E&M Tie Line, and ISDN)
• FF1-006: Serial Port Receive Data
68
6 7 8
6 7 8
H
44
43
DBS 576 (USA), issued January 1999
9 :
9
:
Section 700 - Operation
H
;
;
576-20-700