Panasonic DBS576 Section 700 Technical Manual page 91

Section 700 - Operation
4. Press the HOLD key.
5. Press the HOLD key.
6. Dial the extension number.
7. Press the HOLD key.
8. Enter the extension name:
• If using a large-display phone, press the soft key next
to the desired row of letters. (See Example 1 on page
83.)
• If using a small-display phone press the appropriate
one-touch key. (See Example 2 on page 84.)
Note: Press the FLASH key to clear any existing data.
9. Use the bottom row of FF keys to select a single letter.
• See Example 1. Large-display phone on page 83.
• See Example 2. Small-display phone on page 84.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.
10. Repeat steps 8-9 as many times as necessary to enter the
desired speed dial name.
Note: Press the FLASH key to clear the entire entry.
11. Press the HOLD key to store the entry.
12. To set additional extension names, press the volume up
and down key or press the HOLD key to move to the
desired SSD.
13. Repeat steps 8-12 until all extension names are entered.
14. Press the AUTO key to exit the entry mode.
15. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
• N/A
Related Programming
• N/A
Considerations
• N/A
576-20-700
Action
DBS 576 (USA), issued January 1999
Chapter 4. User Maintenance
Result
0 :
EXT Number/Name displays
Enter EXT # displays
A B C D E F XXX displays (where
XXX = extension number)
Next extension number displays
Enter EXT # displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
91