Automatic Call Screening; Mw Led Operation Change; Programming; Operation - NEC DS2000 Release Notes

DS2000 03.20.07 Release Notes
New Features in 03.20.07
2 ◆ 03.20.07

Automatic Call Screening

With Automatic Call Screening enabled, an extension will immediately screen (broadcast) an
incoming message as soon as the caller starts to leave it in the extension's mailbox. The extension
user hears two beeps followed by the caller's voice.

MW LED Operation Change

With the introduction of Call Screening, only the Ring/Message Lamp flashes for new messages.
The MW LED is used for Call Screening only.
Note that if more than one caller is leaving a message in a mailbox simultaneously, Call Screening
will listen to the first message.

Programming

0101-Call Screening
Enter Y to enable Call Screening. By default, this option is disabled ( N ).

Operation

Manual Call Screening Operation

When Automatic Call Screening is off, you hear a single beep and MW flashes fast
while IntraMail records your caller's message. Your telephone display automatically
changes to show the Call Screening soft key options.
Call Screening is only available while your telephone is idle.
To intercept the call (and stop recording the message):
● Press ANSWER ( ANSW ) or flashing MW .
To hear your caller's message as it is recorded in your mailbox (i.e., activate the Call
Screening mode):
● Press SCREEN ( SCRN ).
- To intercept the call (and stop recording the message):
Press ANSWER ( ANSW ), or
Press SPK , or
Lift the handset, or
Press MW .
- To continue listening to your caller's message as it is being recorded:
Do nothing.
- To exit Call Screening and allow the message to continue recording in private:
Press EXIT .
- To use another feature or process another call:
Press any other feature key.
To exit Call Screening and allow the message to continue being recorded in private:
●
Press EXIT .
To use another feature or process another call:
● Lift the handset, or
● Press SPK , or
● Press any other feature key.
Call Screening is only functional while the telephone is on-hook.
DS2000 Release Notes