Software Corrections In 03.20.09/03.21.00; Caller Id; Ani/Dnis Entry Disables Caller Id; Handsfree And Handsfree Answerback - NEC DS2000 Release Notes

Software Corrections in 03.20.09/03.21.00

Software Corrections in 03.20.09/03.21.00

Caller ID

ANI/DNIS Entry Disables Caller ID

Handsfree and Handsfree Answerback

RING Soft Key Intermittent Operation

IntraMail

Digital Pager Dialing Delay Fixed at 30 Seconds

EG From Admin Mailbox Doesn't Erase All Greetings

Memory Corruption Problem When IntraMail Installed

Pressing # Doesn't Complete Message On Hold Recording
DS2000 Release Notes
DS2000 03.20.09/03.21.00 Release Notes
Software Corrections in 03.20.09/03.21.00
In software versions prior to 03.20.09/03.21.00, making an entry in 1001-ANI/DNIS for a non-T1
trunk would disable Caller ID. This occurred in both DS1000 and DS2000. In software version
03.20.09/03.21.00, the entry for 1001-ANI/DNIS is ignored for non-T1 trunks and will not disable
Caller ID for those types of trunks.
Software version 03.20.09/03.21.00 corrects the intermittent operation of the RING soft key in soft-
ware version 03.20.07. After a keyset user placed a voice-announced Intercom call to another key-
set in version 03.20.07, pressing the RING soft key did not always initiate Forced Intercom Ringing
(i.e., Intercom ringing).
The delay that occurs before IntraMail dials the Digital Pager Callback Number is determined by
the setting of 8004-Delay in Dialing Digital Pager Callback Number. In software version
03.20.07, the delay was fixed at 30 seconds, regardless of the setting of this option. This is cor-
rected in version 03.20.09/03.21.00.
The System Administrator can use the Subscriber Maintenance EG (34) option to simultaneously
erase all recorded greetings in a subscriber mailbox. Additionally, the active greeting is reset to 1.
In software version 03.20.07, the EG option only erased the active greeting. This is corrected in
version 03.20.09/03.21.00.
Installing IntraMail in software version 03.20.07 could potentially cause a system memory corrup-
tion problem. Although unlikely, it could cause symptoms such as system resets after the installa-
tion of certain PCBs. This is corrected in software version 03.20.09.
After the System Administrator records a Message on Hold (and presses DONE or dials # to com-
plete the recording), they can exit the Message on Hold feature by dialing #, pressing EXIT , or
hanging up. In software version 03.20.07, hanging up would cause the message to not be recorded.
This is fixed in software version 03.20.09/03.21.00.
33 ◆ 03.20.09/03.21.00