Software Corrections In 03.20.07; Account Codes; Codes; Call Forwarding Off Premise - NEC DS2000 Release Notes

Hide thumbs Also See for DS2000:
Table of Contents

Advertisement

DS2000 03.20.07 Release Notes

Software Corrections in 03.20.07

Software Corrections in 03.20.07
Software Corrections in 03.20.07

Account Codes

Cannot Use System Speed Dial With Forced Account Codes

Call Forwarding Off Premise

Call Forwarding Off Premise With Account Codes And IntraMail May Reset System

Central Office Calls, Answering/Placing

Quickly Retrieving Call From Hold Can Lock Up Trunk

Door Box

Chimes Over External Page Don't Follow Programmed Tone
26 ◆ 03.20.07
Software version 03.20.07 corrects an incompatibility with System Speed Dial and Forced Account
Codes in prior 03.**.** versions. When Forced Account Codes are enabled in these prior versions,
an extension user cannot enter an Account Code after dialing a System Speed Dial number. This is
now corrected.
Software version 03.20.07 corrects the following reset problem that occurred in prior 03.**.**
software versions:
1.
In Class of Service, enable (Y) 0101-Forced Account Codes, 0101-Forced Account Codes
for Toll Calls Only, and 0101-Off Premise Call Forward.
2.
Set up Call Forwarding Off Premise at extension 304 to use Personal Speed Dial bin 701 and
line 2.
3.
Program line 1 as Key Ring with day overflow to the IntraMail master number (700).
4.
When a call rings line 1, is unanswered, and overflows to the IntraMail Automated Attendant,
the caller dials 304.
5.
The system eventually resets.
Software version 03.20.07 corrects a problem in prior versions in which hanging up a trunk call and
then quickly retrieving another call from Hold can cause the trunks to lock up. Either trunk could
remain in the talk state after disconnect, depending on the exact timing of the user action.
When setting up External Paging to broadcast Door Box chime tones (0202-Door Chime Over
External Page = Y), paging will broadcast whichever tone is programmed in 1801-Door Chime. In
prior software versions, External paging would always broadcast chime tone 1 (regardless of which
tone was programmed.)
DS2000 Release Notes

Advertisement

Table of Contents
loading

Table of Contents