Preparation For Playback (Recording); Playback (Recording) Preparation - Kenwood KXF-W4030 Instruction Manual

Preparation for playback (recording)

Before playback (recording)
1
Set the TIMER switch to OFF.
10
AUTO REVERSE AUTO REVERSE
A B
TAPE TAPE
- ON – OFF
2 7 3 3 7 2
2
Set the POWER switch to ON.
AUTO REVERSE AUTO REVERSE
TAPE A TAPE B
- ON – OFF
2 7 3 3 7 2

Playback (recording) preparation

1
Load a cassette tape in deck A or B.
1
Press the eject (0) key.
AUTO REVERSE AUTO REVERSE
A B
TAPE TAPE
- ON – OFF
2 7 3 3 7 2
2
Insert a tape and close the cassette holder.
Deck A:
Playback only.
2
Select the tape transport direction.
1
Press the play (2 or 3) key.
AUTO REVERSE AUTO REVERSE
TAPE A TAPE B
- ON – OFF
2 7 3 3 7 2
To play (record)
tape side B.
Feed the tape section which cannot be
played or recorded onto in the forward
direction.
2
Press the stop (7) key.
AUTO REVERSE AUTO REVERSE
A B
TAPE TAPE
- ON – OFF
2 7 3 3 7 2
3
Determine the playback (recording) condition.
1
Select the playback (recording) mode.
AUTO REVERSE AUTO REVERSE
TAPE A TAPE B
- ON – OFF
2 7 3 3 7 2
2
Select the Dolby NR mode.
AUTO REVERSE AUTO REVERSE
TAPE A TAPE B
- ON – OFF
2 7 3 3 7 2
TIMER PLAY
REC OFF PLAY
POWER
- ON – OFF
0
Deck B:
Playback/recording
available.
A
B
2 7 3
To play (record)
tape side A.
2 7 3
REV.MODE
DOLBY NR
0
AUTO REVERSE
A
TAPE
- ON – OFF
2 7 3
: Keys and control used in the operations described on this page.
÷ Be sure to remove tape slack before insertion.
÷ The type of tape, that is, the Normal, High position or Metal position
(playback only) is selected automatically.
÷ This unit cannot record sound on a Metal tape.
÷ Be sure to close the cassette holder securely by pushing it.
Normal position
High position
Metal position (playback only)
Tape transport direction indicators
The 2 and 3 indicators show the direction the tape is transported
during recording or playback. The direction used when the tape is last
stopped is held in memory even after this unit has been turned OFF,
and the tape transport starts in the indicated direction when the unit
is started automatically by a timer, etc. To change the tape transport
direction, press the play key for the opposite direction and immedi-
ately press the stop (7) key.
Deck A direction indicators.
Each press switches the indication.
1 "[" : Double-side playback (recording) which stops tape
stops after having played (or recorded) both sides.
2 """ : Playback is endless, but recording stops after having
recorded both sides.
3 """ : One-way playback (recording) which stops tape af-
ter having played (or recorded) a single side.
Each press switches the indication.
1 DOLBY NR "OFF" (extinguished): Dolby NR is not used.
2 DOLBY NR "B": Noise reduction of the ordinary type.
3 DOLBY NR "C": Noise reduction with higher performance.
÷ Select the Dolby NR mode according to the tape recording status.
0
AUTO REVERSE
B
TAPE
3 7 2
TYPE
TYPE
TYPE
Deck B direction indicators.