Timer Recording Of Tuner Broadcast(Deck B Only) - Kenwood KXF-W4030 Instruction Manual

Preparation 1
Set the power switches of the compo-
nents to ON.
2
Set the input selector of the amplifier to
TUNER.
3
Receive the desired radio station with
the tuner.
4
Make "Playback (recording) preparation".
(If relay recording is required, insert tapes
in both decks A and B.)
5
(Remove the disc from the CD player.)
Timer recording of tuner broadcast (Deck B only)
1
Press the MPX FILTER key to ON.
AUTO REVERSE AUTO REVERSE
A B
TAPE TAPE
- ON – OFF
2 7 3 3 7 2
2
Adjust the recording level.
1
AUTO REVERSE AUTO REVERSE
TAPE A TAPE B
- ON – OFF
2 7 3 3 7 2
2
3
Set the amplifier volume to the minimum position.
4
Set the TIMER switch to REC.
AUTO REVERSE AUTO REVERSE
TAPE A TAPE B
- ON – OFF
2 7 3 3 7 2
5
Set the timer.
1. To ensure that the cassette deck's automatic shut off switch operates before the power is shut off, set the timer so that it operates for a little
longer than the playing time of the tape.
Notes Notes Notes
2. Switch on the power to the cassette deck. (The timer will not operate if it is switched off.)
0
(when recording FM broadcasts only)
MPX FILTER
Set the record-pause mode.
8 ¶
PAUSE REC/ARM
Adjust the recording balance and
recording level.
TIMER PLAY
REC OFF PLAY
0
AUTO REVERSE
A
TAPE
- ON – OFF
2 7 3
: Keys and control used in the operations described on this page.
÷ Refer to the "How to use the MPX FILTER key".
÷ To cancel, press the MPX FILTER key again.
÷ While pressing the PAUSE (8) key, press the REC/ARM (¶) key.
÷ Refer to the "How to record".
÷ Set the desired time when the recording is to be started.
÷ When the set time comes, the powers of the related components are
turned ON and recording starts.
÷ Recording stops when the end of side to be recorded is reached.
÷ Read carefully the instruction manual of your audio timer.
Timer operations
0
AUTO REVERSE
B
TAPE
3 7 2
"MPX" lights up.
&
^
23