Kenwood KXF-W4030 Instruction Manual page 9

1 Deck A
This deck is used exclusively for play-
back.
2 Deck A eject (0) key
Press to open the cassette holder of
deck A.
3 Deck B eject (0) key
Press to open the cassette holder of
deck B.
4 Deck B
This deck is capable of both playback
and recording.
5 Deck A operation keys 0~!
1
: Rewind key (for fast winding of
tape toward the left reel seen
from you)
¡
: Fast Forward key (for fast wind-
ing of tape toward the right reel
seen from you)
2, 3 : Play keys
7
: Stop key (Stop)
6 POWER switch
Press to turn this unit ON and OFF.
7 PHONES jack
Connect stereo headphones (optional)
here.
8 TIMER switch
This switch is used in setting of timer
playback and timer recording.
9 MODE key
Press to change the recording
level,balance,or bias settings.
0 REC LEVEL/BAL/BIAS knob
Adjust this before recording.
! Deck B operation keys
2, 3 : Play keys
7
: Stop key (Stop)
1
0
: Rewind key (for fast winding of
tape toward the left reel seen
from you)
¡
0
: Fast Forward key (for fast wind-
ing of tape toward the right reel
seen from you)
8
pause ( PAUSE) key
:Press to let tape transport pause
temporarily.
¶
record ( REC/ARM) key
:Press in stop mode to start re-
cording or press in record mode
to let the recording pause after
leaving a non-recorded blank of
4 seconds.
@ RESET A key
Press to reset the tape counter of deck
A to "0000".
# DOLBY NR key
0
Press to switch the Dolby Noise Reduc-
tion mode to B = C = OFF. This makes
!
it possible to use the Dolby NR effect in
recording and playback.
$ REV. MODE key
™
Press to change the tape transport di-
rection.
% NORM.DUBB. key
^
Dubbing at the normal speed.
^ HIGH DUBB. key
^
Dubbing at a high speed.
Controls and indicators
& MPX FILTER key
Press to reduce beat noise when record-
ing FM broadcasts.
* CCRS key
Press to start recording after automatic
setting of the optimum CD recording
level and optimum tape recording bias.
( AUTO BIAS key
When this key is pressed, the bias level
!
appropriate for the tape is set automati-
cally for recording.
) RESET B key
^
Press to reset the tape counter of deck
B to "0000".
!
0
0
(
(
9
&
¡
^