System Connections - Kenwood KXF-W4030 Instruction Manual

System connections

Make connections as shown below.
When connecting the related system components, refer also to the
instruction manuals of the related components.
6
Caution:
Do not plug in the power lead until all connections are com-
pleted.
( Except for U.S.A., Canada )
Caution
Be sure to adhere followings. Or proper ventilation will be blocked causing damage or fire hazard.
÷ Do not place any objects impairing heat radiation onto the top of unit.
÷ Leave a space around the unit (from the largest outside dimension including projection)
equal or greater than, shown below.
Top panel : 50 cm
REC
LINE IN
L
R
Audio cords
*The connected component model is
variable dependent on areas.
1. Connect all cords firmly. If connections are loose, there could be loss of sound or noise produced.
2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging
Notes Notes
connection cords without removal of the power cord can cause malfunctions or damage to the unit.
Side panel : 10 cm Back panel : 10 cm
SYSTEM CONTROL
PLAY
LINE OUT
L
R
Audio cords
SIGNAL
GND
TAPE
PHONO REC PLAY
L
R
Amplifier or
Receiver
Audio cord
CD player
Malfunction of microcomputer
If operation is not possible or erroneous display appears even
though all connections have been made properly, reset the
microcomputer referring to "In case of difficulty".
System control cord
SYSTEM
CONTROL
SL-16
SYSTEM
CONTROL
System control cord
1 2 3
7 6
0
4 5 6
7 8 9
4 ¢
0 +10
1 ¡
¢
TO AC outlet
Turntable