Specifications - Kenwood KXF-W4030 Instruction Manual

Specifications

Track System ................. 4 track, 2 channel stereo
Recording System .......... AC bias (Frequency: 105 kHz)
Heads ............................... A DECK
B DECK
Motors .............................. A DECK ............. DC motor
B DECK ............. DC motor
Wow and Flutter ............. ±0.17 % (IEC)
±0.28 % (DIN)
0.1 % (W.R.M.S)
Fast Winding Time ......... Approx. 110 seconds (C-60 tape)
Frequency Response
TYPE tape .................... 30 Hz to 18,000 Hz, ±3 dB
TYPE tape .................. 30 Hz to 19,000 Hz, ±3 dB
Signal to Noise Ratio
Dolby NR OFF ................ 56 dB
(IEC, 250 nWb/m, TYPE
Dolby NR OFF ................ 59 dB
Dolby B NR ON .............. 68 dB
Dolby C NR ON .............. 75 dB
(3rd, H.D., 3 %, TYPE tape)
1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
Notes Notes
2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).
Playback head ................... 1
Playback/recording heads 1
Erasing head ..................... 1
tape)
Harmonic Distortion ....... Less than 1.2 %
(at 315 Hz, 3rd H.D., 250 nWb/m, TYPE
Input sensitivity/Impedance
LINE IN ........................... 122.8 mV/47 k
Output Level/Impedance
LINE OUT ....................... 775 mV/1.0 k
Headphones ................... 0.5 mW/32
1
[General]
1
Power Consumption ...... 20 W
Dimensions ...................... W:
Weight (Net) .................... 5.3 kg (11.7 lb)
tape)
440 mm (15-3/4")
H: 132 mm (5-3/16")
D: 380 mm (14-15/16")
27