Handling The Cassette Tape - Kenwood KXF-W4030 Instruction Manual

Handling the cassette tape

Notes on cassette tape
Safety tab (accidental erasure prevention tab)
After an important recording has been finished, break the safety
tab, to prevent the recorded contents from being erased or
recorded on accidentally.
For A side
For B side
To re-record
1. Longer tape than 110 minutes cassette tape
Since longer tape than 110 minutes cassette tape is very
thin, the tape could adhere to the pinch roller or be easily cut.
Notes Notes Notes
It is recommended that these tapes not be used with this
unit to prevent possible damage.
Apply tape only to the position
where the tab has been removed.
To store cassette tapes
Do not store the tapes in a place which is subject to direct
sunlight, or near equipment that generates heat. Keep the
cassette tapes away from any magnetic field.
When there is slack in the tape
In such a case, insert a pencil into the reel hole and wind the reel
hub to remove the slack.
2. Endless tapes
Do not use an endless tape, as this could damage the mechanism
of the unit.
Important items
5