Epson Runsense SF-810 User Manual page 108

SF-810 User Manual
After checking, press A and go to the following
step.
F
Select Line 1.
Use C/D to select, and then press A.
G
Select Calories Burnt.
Use C/D to select, and then press A.
Screen Image is displayed.
After checking, press A and go to the following
step.
Note:
❏ When you want to set 2 Lines or 3 Lines,
repeat steps 6 and 7.
❏ When 3 Lines is set, Latitude/Longitude can
only be selected for Line 2.
H
Complete the settings.
Hold down A.
Settings
The measurement screen is displayed.
Press A on the measurement screen to change the
screen, and then check if Screen4 has been
changed.
Note:
Hold down A on the measurement screen to display the
time screen.
Setting Pace&Graph/HR&Graph
Here we will explain how to display Pace&Graph in
Screen4.
Operation buttons
A
Display the measurement screen.
Use one of the following methods to display.
❏ When performing GPS positioning:
Press C on the time screen.
❏ When skipping GPS positioning:
Press C on the time screen, and then select
Skip on the GPS positioning screen.
"Skipping GPS positioning" on
U
page 31
❏ When not performing GPS positioning
(Indoor mode):
Press C on the time screen, and then select
Indoor on the GPS positioning screen.
"Indoor mode" on page 31
U
108