Charging; Before Use - Epson Runsense SF-810 User Manual

SF-810 User Manual

Charging

Before use

c
Important:
❏ Make sure you use the cradle that came with this product.
❏ Do not place the device in the cradle if it is wet from water or sweat.
Otherwise the contact points on the cradle and the device could corrode, malfunction, or cause a
communication failure.
❏ Do not perform button operations when it is wet; otherwise, a malfunction could occur.
If the device is wet from water or sweat, use a little running water to wash the contact points and sensor, wipe away most
of the water with a towel and so on, and then let it dry naturally before placing it in the cradle.
Contact points/Sensor
See the following for more details about daily maintenance.
"Looking after your device" on page 114
U
Preparing and Basic Operations
23
Use low pressure water to wash the device.