Looking After Your Device; About The Strap - Epson Runsense SF-810 User Manual

SF-810 User Manual

Looking after your device

c
Important:
❏ If the device is placed in the cradle when it is covered in water, sweat, or dirt, the contact points could corrode,
malfunction, or cause a communication failure.
❏ Do not perform button operations when it is wet; otherwise, a malfunction could occur.
After using the device, wash the contact points and sensor lightly with tap water, wipe away most of the water with a
towel and so on, and then let it dry naturally.
If charging or communication becomes unstable, clean the contact points on the device and the cradle with a damp
cotton bud.
Do not clean using organic solvents such as benzine, thinner, alcohol, or detergent. This could cause the product to
degrade.

About the strap

If the strap gets soiled, wash it with water and wipe thoroughly with a dry cloth. This strap is made from polyurethane
and after years of use the colour may fade or it may lose its elasticity.
Maintenance
114