Brother DCP-8110DN Service Manual page 197

(8) Turn the conductive bushing in the direction of the arrow to release the lock.
(9) Remove the other end of conductive bushing to remove the document feed roller ASSY
1 from the lower ADF chute.
Conductive bushing
(10) Remove the taptite cup S M3x8 SR screw to remove the ADF earth harness from the
lower ADF chute.
(11) Remove the three taptite cup B M3x10 screws to remove the drive frame ASSY from the
lower ADF chute.
(12) Remove the ADF motor harness from the ADF motor ASSY.
Taptite cup S M3x8 SR
Lower ADF chute
ADF motor harness
Assembling Note:
When attaching the drive frame ASSY, make sure that the gear of the arm ASSY L2
shaded in gray is engaged with the position shown in the illustration below.
Arm ASSY L2
Document feed roller ASSY 1
Lower ADF chute
Conductive
bushing
Fig. 3-61
ADF earth harness
ADF motor
Drive frame ASSY
ASSY
Fig. 3-62
Fig. 3-63
3-51
Taptite cup B M3x10
Drive frame ASSY
Confidential