Brother DCP-8110DN Service Manual page 68

Error
Problem
codes
E100 Program error
When the center thermistor of the
fuser unit is higher than the idle
E200 temperature, the side thermistor
detected a temperature higher
than the specified temperature.
E300 An unidentified error occurred.
E400 An unidentified error occurred.
Write error in the EEPROM of
E600
the main PCB
E700 An unidentified error occurred.
E800 An unidentified error occurred.
E900 An unidentified error occurred.
EA00 An unidentified error occurred.
EB00 An unidentified error occurred.
EC00 Detected a main fan failure.
Communication between the
wireless LAN PCB and the main
ED00
PCB cannot be established at
machine startup.
Detected communication failure
after communication between
EE00
the wireless LAN PCB and the
main PCB was established.
Unstable power supply was
EF00
detected.
Malfunction of the flash memory
F000
on the main PCB
Refer Error
to: codes
2-64 F100 An unidentified error occurred.
2-65 F200 An unidentified error occurred.
2-65 F300 An unidentified error occurred.
2-65 F400 An unidentified error occurred.
2-65 F500 An unidentified error occurred.
2-66 F600 An unidentified error occurred.
2-66 F800 An unidentified error occurred.
The country code was not
2-66 F900
entered correctly.
2-66 FA00 An unidentified error occurred.
2-66 FB00 An unidentified error occurred.
2-66 FC00 An unidentified error occurred.
2-66 FD00 An unidentified error occurred.
2-67 FE00 An unidentified error occurred.
2-67 FF00 An unidentified error occurred.
2-67
2-23
Refer
Problem
2-68
2-68
2-68
2-68
2-68
2-68
2-68
2-68
2-68
2-68
2-68
2-68
2-68
2-68
Confidential
to: