Brother DCP-8110DN Service Manual page 74

Code 1 Code 2
Corresponding command not received although the FIF
20 0D
command sending bit is ON.
20 0E EOR command received.
Line disconnected without receiving DCN after receiving
the last page.
20 13
(After receiving EOP and sending CFR, received BYE
before receiving DCN. (T38)
Remote terminal only with V.29 capability in 2,400 or 4,800
32 01
bps transmission.
32 02 Remote terminal not ready for polling.
Remote terminal not equipped with password function or
32 10
its password switch is OFF.
Remote terminal not equipped with or not ready for
32 11
confidential mailbox function.
Remote terminal not equipped with or not ready for relay
32 12
broadcasting function.
32 13 No confidential mail in the remote terminal.
Available memory space of the remote terminal is less
32 14 than that required for reception of confidential mails or
relay broad-casting instruction.
Remote terminal not equipped with Cipher receiving
32 15
function.
32 16 Remote terminal not equipped with SEP function.
32 17 Remote terminal not equipped with SUB function.
32 18 Remote terminal not equipped with color function.
40 02 Illegal coding system requested.
40 03 Illegal recording width requested.
40 05 ECM requested although not allowed.
40 06 Polled while not ready.
40 07 No document to be sent when polled.
40 10 Nation code or manufacturer code not correct.
Group number not registered for relay broad-casting was
40 11 specified or the number of addressees specified exceeded
the maximum allowable number.
40 12 Retrieval attempted while not ready for retrieval.
Polled by any other manufacturers' terminal while waiting
40 13
for secure polling.
40 14 Common key not registered although it needs to be used.
40 17 Invalid resolution selected.
40 20 Invalid full color mode selected.
Vertical resolution capability changed after compensation
50 01
of background color.
Password plus "lower 4 digits of telephone number" not
63 01
coincident
63 02 Password not correct
63 03 Polling ID not correct
63 04 Specified confidential ID and MailBox ID do not match.
63 05 Relay broad-casting ID not correct
Specified Retrieval ID and MailBox Retrieval ID do not
63 06
match.
Cause
2-29
Refer
to.
2-96
2-96
2-96
2-96
2-96
2-96
2-96
2-96
2-96
2-96
2-96
2-96
2-96
2-96
2-96
2-96
2-96
2-96
2-96
2-96
2-96
2-96
2-96
2-96
2-96
2-96
2-96
2-96
2-96
2-96
2-96
2-96
2-96
Confidential