Brother DCP-8110DN Service Manual page 361

(9) Pull out the wireless LAN harness and the USB host harness from the main PCB shield
calking ASSY.
(10) Remove the screw pan (S/P washer) M3.5x6 DA screw to release the NCU earth
harness, and remove the NCU earth harness from the guide on the machine.
(11) Remove the four taptite bind B M4x12 screws and the taptite cup S M3x8 SR screw.
(12) Release the six hooks, and slide the joint cover in the direction of the arrow to remove it
from the machine.
Joint cover
Main PCB
shield calking
ASSY
USB host
harness
Wireless LAN
harness
Taptite cup S M3x8 SR
Hook
Taptite bind B
M4x12
Hook
Hooks
Taptite
bind B
M4x12
Fig. 7-15
7-11
Taptite bind B M4x12
Hooks
Taptite bind B
M4x12
Guides
NCU earth harness
Pan (S/P washer)
M3.5x6 DA
Confidential