PICKUP COIL
REMOVING THE PICKUP COIL ROTOR
1. Remove:
• clutch cable holder 1
• pickup coil lead holder 2
• pickup coil rotor cover 3
NOTE:
Loosen each bolt 1/4 of a turn at a time,
in stages and in a crisscross pattern.
After all of the bolts are fully loosened,
remove them.
2. Remove:
• pickup coil rotor bolt 1
• washer
• pickup coil rotor 2
NOTE:
While holding the generator rotor 3
with the rotor holding tool 4, loosen the
pickup coil rotor bolt.
Rotor holding tool
YU-01235
INSTALLING THE PICKUP COIL ROTOR
1. Install:
• pickup coil rotor 1
• washer
• pickup coil rotor bolt
NOTE:
When installing the pickup coil rotor,
align the pin 2 in the crankshaft
sprocket with the groove a in the
pickup coil rotor.
4 - 37
ENG
4