Special Tools - Yamaha YZF-R1K Service Manual

EB104000

SPECIAL TOOLS

The following special tools are necessary for complete and accurate tune-up and assembly.
Use only the appropriate special tools as this will help prevent damage caused by the use of
inappropriate tools or improvised techniques.
When placing an order, refer to the list provided below to avoid any mistakes.
Tool No.
Flywheel puller
90890-01080
This tool is used to remove the generator
rotor.
Rotor holding tool
YU-01235
This tool is used to hold the generator
rotor when removing or installing the gen-
erator rotor bolt or pickup coil rotor bolt.
Drive chain cutter
90890-01286
This tool is used to remove the drive
chain.
Piston pin puller
YU-01304
This tool is used to remove the piston
pins.
Fuel level gauge
YU-01312-A
This tool is used to measure the fuel level
in the float chamber.
Radiator cap Radiator cap tester
tester Adapter
YU-24460-01
Adapter These tools are used to check the cooling
YU-33984 system.
Steering nut wrench
YU-33975
This tool is used to loosen or tighten the
steering stem ring nuts.
Damper rod holder
YM-1423
This tool is used to hold the damper rod
assembly when loosening or tightening
the damper rod assembly bolt.
Tool name/Function
1 - 5
SPECIAL TOOLS
Illustration
GEN
INFO
1