Synchronizing The Carburetors - Yamaha YZF-R1K Service Manual

ADJUSTING THE VALVE CLEARANCE/

SYNCHRONIZING THE CARBURETORS

3 - 15
g. Measure the valve clearance again.
h. If the valve clearance is still out of
specification, repeat all of the valve
clearance adjustment steps until the
specified clearance is obtained.
7. Install:
• all removed parts
NOTE:
For installation, reverse the removal
procedure. Note the following points.
8. Install:
• timing chain guide (exhaust side)
• timing chain tensioner
• pickup coil rotor cover
• cylinder head cover
• spark plugs
Refer to "CAMSHAFTS" in chapter 4.
EB303010
SYNCHRONIZING THE CARBURETORS
NOTE:
Prior to synchronizing the carburetors,
the valve clearance and the engine
idling speed should
adjusted and the ignition timing should
be checked.
1. Stand the motorcycle on a level surface.
NOTE:
Place the motorcycle on a suitable
stand.
2. Remove:
• rider seat
• fuel tank
• Refer to "SEATS" and "FUEL TANK".
CHK
ADJ
be properly
3