In This Guide - HP 10:10 LAN Bridge MB Installation And Reference Manual

In This Guide

This guide contains information to help you install, configure, and troubleshoot your
HP 28673A 10:10 LAN Bridge MB. The guide is organized as follows:
Chapter 1 provides a brief introduction to the bridge. It describes important product features,
what you should have received with your bridge, and an overview of how the bridge works.
Chapter 2 provides bridge installation instructions. It describes, in detail, the steps that you
should follow to install the bridge.
Chapter 3 describes all the bridge's console interface commands.
Chapter 4 contains troubleshooting information. If you experience problems with the bridge,
you should refer to this chapter.
Appendix A provides information on the cables and connectors that you should use to connect
the bridge to the other devices in your network.
Appendix B contains the technical specifications for the bridge.
Appendix C describes how to configure commonly found modems for use with the bridge's
console connection.
Appendix D provides information on network addressing for those using SNMP network
management stations to manage the bridge over an IP or IPX network.
Appendix E provides a lists of Ethernet packet types and vendor codes to help you configure
the bridge to perform certain types of packet filtering.
Safety Information contains safety information about the bridge. You should read and
understand this information before you use the product.
2