Ip Addresses For Tcp/Ip Networks; Using Assigned Ip Addresses - HP 10:10 LAN Bridge MB Installation And Reference Manual

IPX Addressing Notes:
Because the IPX address is assigned automatically, no IPX configuration is necessary;
no IPX configuration is provided on the bridge console interface. By default, the bridge
is ready to be managed by an SNMP network management station that is configured for
IPX communications.
If the bridge is part of a network that is running IPX only, you do not need to perform
the IP configuration.

IP Addresses for TCP/IP Networks

If you have chosen to manage your bridge with an SNMP/IP network manager over a TCP/IP
network, your bridge must be configured with an IP address. If your network will be connected
with other networks that use IP addresses, you must use assigned IP addresses. Otherwise, you
can build your own IP addressing scheme (described on the next page).

Using Assigned IP Addresses

Hewlett-Packard strongly recommends that if you intend to expand, integrate, or connect your
network to other networks, you use an assigned IP address. There is a formal process to assign
unique IP addresses to networks worldwide. DDN Network Information Center in Menlo Park,
California, is in charge of assigning IP addresses. Contact the DDN Network Information
Center by phone or mail. They will provide instructions and the necessary documents to assign
and register your IP addresses.
Telephone
Mailing Address
D-2 Network Addressing
in U.S. only: 1-800-235-3155
worldwide: 415-859-3695
Hostmaster
DDN Network Information Center
SRI International
333 Ravenswood Avenue
Menlo Park, California 94025