Table of Contents
Advertisement
COunters
Displays data packet statistics and error indications for ports 1 and 2 individually. These
statistics are provided:
Bytes transmitted
Bytes received
Packets transmitted
Packets received
Packets forwarded
Packets filtered
Packets missed
Outbound packets
discarded
CRC errors
Carrier lost errors
Total collisions
Excess collisions
Late collisions
Alignment errors
4-10 Operation
The number of bytes of data transmitted to destination nodes.
The number of bytes of data received from source nodes.
The number of 802.3 packets (MAC frames) or Ethernet packets
transmitted to destination nodes.
The number of 802.3 packets (MAC frames) or Ethernet packets
received from source nodes.
The number of packets forwarded from the receiving port to the
transmitting port.
The number of packets discarded by the bridge based on its
configuration (operating state, address table, wildcard filters).
The number of packets discarded because the bridge receive buffers
are full.
The number of packets discarded because the bridge transmit buffers
are full.
The number of packets received for which the bridge detects a CRC
error. Packets with CRC errors are discarded.
The number of times the bridge has detected a loss of the network
activity indicator (carrier) when transmitting a packet.
The number of packets transmitted by the bridge that collided with
another transmission on the network and had to be retransmitted.
The number of times 16 or more collisions were encountered on a
transmission attempt.
The number of times a collision occurred after the packet preamble
was transmitted.
The sum of the number of packets received which the bridge detects
are either misaligned, contain an incorrect CRC, or are smaller than
the minimum 802.3/Ethernet packet size of 64 bytes (runt packets).
Advertisement
Table of Contents
