Table of Contents
Advertisement
ADdress table
Displays any or all of the address table entries. You are prompted for the type of entries you
want to read (all, dynamic, static, or permanent). The requested table entries are displayed one
screen at a time if there are more than 20 entries.
BRidge info
Displays the parameters shown in the table below.
Bridge ID
EPROM code version
RAM code version
Bridge station address
Operating state
Spanning tree state
Topology change count
Bridge temperature
The bridge model number and name.
The version number of the code currently stored in the bridge
EPROM.
The version number of the code currently stored in the bridge
battery-backed RAM.
The bridge's globally-administered, factory-supplied 12-digit
hexadecimal station address.
The current bridge operating state.
The current state of the bridge as determined by STP. Possible
states are blocking, listening, learning, forwarding, and
disabled.
If the bridge operating state is not one that supports STP, the
spanning tree state will be disabled.
For more information on the meaning of the spanning tree
states, refer to the IEEE specification, 802.1d MAC Bridges.
An STP statistic indicating the number of times the network
topology has changed since the last bridge reset.
The current temperature state of the bridge. The value should
be Normal. If the value is WARNING! Bridge temperature
over limit, the fan in the bridge power supply may have failed.
In this case, you should unplug the bridge power cord and
contact your HP authorized LAN dealer or local HP sales and
support office.
Operation 4-9
Advertisement
Table of Contents
