Fujitsu ETERNUS DX200F Configuration Manual page 124

Chapter 9 Advanced Copy Settings
9.2 Performing a Copy (SnapOPC+)
14
Change the status of all the disks with [Offline] to [Online]. In this case, change the status of Disk 1
through to Disk 8 to [Online].
After the status of the disks is changed to [Online], file systems and drive letters are assigned.
If any drive letter is unused, the unused drive letter is assigned in ascending order of the drive let-
ters, which results in discontinuous drive letters. Change the automatically assigned drive letter if
necessary.
15
Check if the file that was created in
Settings" (page 108)
Step 8
is displayed for the copy source drive.
FUJITSU Storage ETERNUS DX200F All Flash Array Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
in "■ Operation Disk Settings" (page 108)
124
in "8.2.3.2 Disk
P3AM-8462-01ENZ0