Storage Management (Initial Setup 1) - Fujitsu ETERNUS DX200F Configuration Manual

Chapter 5 General Settings
5.4

Storage Management (Initial Setup 1)

After logging in, the Initial Setup screen of ETERNUS Web GUI appears.
5.4 Storage Management (Initial Setup 1)
Perform the settings that are required before operation of the ETERNUS DX by using the Initial Setup 1 screen
of ETERNUS Web GUI.
Perform the following settings according to the wizard screen:
Set Storage System Name
•
• Change User Password
Set Thin Provisioning
•
Register Advanced Copy License
•
Set Network Environment
•
The procedure for initial setup is shown below. For details on the settings, refer to "Configuration Guide (Web
GUI)".
FUJITSU Storage ETERNUS DX200F All Flash Array Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
40
P3AM-8462-01ENZ0