Fujitsu ETERNUS DX200F Configuration Manual page 73

Chapter 6 Monitoring Settings
6.3 Remote Support Setup
5
In the [Setup Remote Support] screen, set the items in [Customer Information] and [Communication
Environment Information].
6
Click the [Set] button.
A confirmation screen appears.
7
Click the [OK] button.
The remote support settings are applied.
8
Check the setting completion message and click the [Done] button.
The screen display returns to the remote support screen.
The specified information is sent to the remote support center and the connection of the ETERNUS DX
and the remote support center is checked.
The connection check result is sent to the e-mail address that is set in "Result notification information".
FUJITSU Storage ETERNUS DX200F All Flash Array Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
73
P3AM-8462-01ENZ0