Generation Management Volume (Sdv) Creation; Figure 5.7 Generation Management Volume (Sdv) Creation - Fujitsu ETERNUS DX200F Configuration Manual

Chapter 5 General Settings
5.7 RAID Configuration Settings
5.7.3

Generation Management Volume (SDV) Creation

Create a generation management volume in the backup RAID group.
Create SDV for seven generations (as a backup area for seven days a week) in the backup RAID group "RG1"
created in "5.7.1 RAID Group Creation" (page

Figure 5.7 Generation Management Volume (SDV) Creation

Backup RAID group (RG1)
1.6TB
1.6TB
RAID5 (4+1)
The procedure to create a generation management volume (SDV) is as follows:
1
Click the [Volume] tab on the navigation of the ETERNUS Web GUI screen.
The [Volume] screen appears.
2
In [Action], click [Create].
The [Create Volume] screen appears.
3
Set the required items in the [Create Volume] screen and click the [Create] button.
Name: sdv
Type: Snap Data Volume
Capacity: 1TB (*1)
RAID Group / TPP Selection: Manual
Manual Setting: RG1
Number of Volumes: 7 (*2)
1.6TB
1.6TB
1.6TB
FUJITSU Storage ETERNUS DX200F All Flash Array Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
49).
Generation management volume
sdv0 - sdv6
(Snap Data Volume)
53
P3AM-8462-01ENZ0