Sony XDS-PD1000 Operation Manual page 103

Alarm message in status
display area
DISC frequency mismatch! RECORDING OR PLAYBACK IS NOT
REC INHI.!
FORMAT NG!
DI read err
DRV ADJ err
Read err
BCA Read Error!
DISC Error
XDROOT Error!
BPAV Error!
During front panel operations
Alarm message in status
display area
KEY INHI.!
Not Open Clip!
Clip Top!
Clip End!
MAX # Clips
Media Full!
TC EXT!
REGEN mode!
REC mode!
Alarm message in video monitor screen Description/action
POSSIBLE. SYSTEM SETTINGS
DIFFERENT FROM DISC.
AUTO FORMATTING WAS NOT
COMPLETED. THE DISC WRITE
PROTECT TAB IS SET TO SAVE.
PLEASE EJECT DISC.
AUTO FORMATTING WAS NOT
COMPLETED.
CANNOT READ DISC INFORMATION.
PLEASE EJECT DISC.
CANNOT PERFORM AUTO DRIVE
ADJUSTMENT.
CANNOT READ DISC DATA. PLEASE
EJECT DISC.
CANNOT READ DISC BCA AREA.
PLEASE EJECT DISC.
DISC NEEDS TO BE RESTORED.
USERDATA XDROOT ERROR.
USERDATA BPAV ERROR.
Description/action
This appears when the KEY INHI switch is "ON".
Set the KEY INHI switch to "OFF".
This appears when a clip operation is attempted with no clip selected.
Select a clip in the clip list screen and try the operation again.
During playback, this appears if you execute a reverse search when the unit is stopped at the first
frame of a clip. To move to another clip, press the PREV, NEXT, SHIFT + PREV, or SHIFT + NEXT
button, or perform a thumbnail search.
During playback, this appears if you execute a forward search when the unit is stopped at the last
frame of a clip. To move to another clip, press the PREV, NEXT, SHIFT + PREV, or SHIFT + NEXT
button, or perform a thumbnail search.
No more clips can be recorded because the maximum number of recorded clips has been
reached.
Delete unneeded clips.
Recording or copying is not possible because the internal storage is full.
Delete unneeded clips.
This appears when TCG on page P4 TC of the function menu is set to "EXT", and you try to preset
timecode or user bits by setting PRST/RGN to "PRESET".
Set TCG to "INT" (see page 43).
This appears when PRST/RGN on page P4 TC of the function menu is set to "TC" or "VITC", and
you try to preset timecode or user bits.
Set PRST/RGN to "PRESET" (see page 43).
Stop recording and try again.
This appears when the system frequency setting of
this unit and the system frequency of the inserted
disc do not coincide. (In the case of discs recorded in
23.98P mode, pull-down play is possible.)
Replace the disc with one that is compatible with the
system frequency setting of this unit, or change the
system frequency setting of this unit.
Set the Write Inhibit tab on the disc so as to enable
recording (see page 44).
Once eject the disc and then insert it again or insert
another disc.
The inserted disc requires to be restored.
Eject the disc, and restore it or format it on another
XDCAM device.
You cannot use clips in the UserData >XDROOT
directory.
You cannot use clips in the UserData >BPAV
directory.
103
Troubleshooting