Sony XDS-PD1000 Operation Manual page 18

g COPY button
Displays the Clip Copy screen. (see page 55).
h RESET/RETURN button
Functions as the RESET button or the RETURN button.
RESET button: Resets counters or the setting values of
the timecode generator.
RETURN button: In clip list screens, returns to the
previous procedure.
i SHIFT button
Switches between functions for any button with two
functions.
j Arrow buttons and IN/OUT indicators
The arrow buttons are used for clip selection, menu setting
operations, and so on.
When you use the arrow buttons to set an IN and OUT
point in the clip, it becomes possible to copy only the part
defined by the IN and OUT points (see page 56). When an
IN and OUT points are set in the clip, the IN and OUT
indicators light.
k PUSH SET knob
This is used for menu operations and thumbnail operations
in a clip list screen. Turn the knob to select items, and press
it to confirm the selection. This button is also used to set
numerical and timecode values.
6 Recording and playback control section
1 PREV button
2 PLAY button
7 STANDBY indicator
6 REC INHI indicator
a PREV (previous) button
Press this button, turning it on, to show the first frame of
the current clip. While the first frame of a clip is shown,
pressing this button jumps to the beginning of the previous
clip. This button is also used together with other buttons
for the following operations.
Reverse direction high-speed search: Hold down the
PLAY button, and press this button. A high-speed (50
times normal) search in the reverse direction is carried
out.
Displaying the first frame of the first clip: Hold down
the SHIFT button, and press this button.
18
Front Panel
3 NEXT button
4 STOP button
5 REC button
b PLAY button
To start playback, press this button, turning it on.
c NEXT button
Press this button, turning it on, to jump to the next clip and
show the first frame. During chase play, play jumps to the
last frame that is playable at that time.
This button is also used together with other buttons for the
following operations.
Forward direction high-speed search: Hold down the
PLAY button, and press this button. A high-speed (50
times normal) search in the forward direction is
carried out.
Displaying the last frame of the last clip: Hold down the
SHIFT button, and press this button.
d STOP button
To stop recording or playback, press this button, turning it
on. The frame at the stop point appears.
e REC (record) button
To start recording, hold down this button, and press the
PLAY button. The recording takes place on an unrecorded
part of the media.
To stop recording, press the STOP button.
f REC INHI (recording inhibit) indicator
Lights when Professional Disc is selected as the operation
target media and a disc in record-inhibited state is loaded
(see page 44).
Also lights when an SxS memory card is loaded and
selected as the operation target media.
Note
Recording to SxS memory cards is not possible.
g STANDBY indicator
Lights when the unit is put into disc stop mode. After a
certain time passes in a disc stop mode, the unit
automatically enters standby off mode and the indicator
goes off.
You can specify the time until the unit enters standby off
mode.
For details, see the description of setup menu item 501
STILL TIMER (see page 80).