Sony XDS-PD1000 Operation Manual page 16

e MEMORY button
This button selects an SxS memory card as the operation
target media.
f Slot selection lamps
These light to indicate the selected memory card slot.
2 Disc control section
1 DISC ACCESS indicator
a DISC ACCESS indicator
This lights when the Professional Disc is accessed.
Note
While the ACCESS indicator is lit, do not turn off the main
power switch on the rear panel or disconnect the power
cord.
This could lead to a loss of data from the disc.
b DISC IN indicator
This lights when a Professional Disc is inserted.
c Disc slot
Insert a Professional Disc in this slot (see page 44).
d EJECT button
To remove the Professional Disc, press this button (see
page 44).
3 Memory card slots
1 Memory card slots
3 MEMORY ACCESS A/B lamps
16
Front Panel
4 EJECT button
3 Disc slot
2 DISC IN indicator
2 Eject buttons
a Memory card slots
These two slots (A and B) can receive SxS memory cards
(see page 46).
b Eject buttons
To remove the SxS memory card from the slot, press the
eject button to release the lock, then press the button once
more. This makes the media come out of the slot partially
(see page 47).
c MEMORY ACCESS A/B lamps
Indicate the state of slots A and B (see page 47).
4 Audio level adjustment section
1 CH-1/ALL CH, CH-2 to CH-4 adjustment knobs
2 VARIABLE switch
a CH-1/ALL CH, CH-2 to CH-4 (audio level)
adjustment knobs
Depending on the setting of the VARIABLE switch, these
adjust the input audio or playback audio levels of channels
1 to 4.
You can adjust levels of channels 5 to 8 using the function
menu. For details, see "P3 AUDIO page" (page 43).
By the setting of setup menu item 131 AUDIO VOLUME,
you can enable the CH-1/ALL CH adjustment knob to
simultaneously adjust all eight channels. When this
simultaneous adjustment is enabled, the ALL CH indicator
lights.
b VARIABLE (audio level adjustment selector)
switch
This selects whether input audio levels or playback audio
levels are adjusted by the CH-1/ALL CH and CH-2 to CH-
4 adjustment knobs for channels 1 to 4, or by the function
menu setting for channels 5 to 8.
REC: Adjust the input audio levels. The playback audio
levels are fixed at their preset values.
PRESET: The audio levels are fixed at their preset values.
PB: Adjust the playback audio levels. The input audio
levels are fixed at their preset values.