Sony XDS-PD1000 Operation Manual page 55

When two SxS memory cards are loaded
Press the MEMORY button to switch between the
copy target cards (A/B).
4
Do one of the following to select the clip to copy.
• Turn the PUSH SET knob.
• Press the arrow buttons.
To select several continuous clips
Move the cursor to the start or end of the clips that you
want to select, and then proceed as described above
while holding down the SHIFT button.
When copying all clips on the media
Proceed to step 5 without carrying out clip selection
operation.
To copy part of a clip
When you select a single clip and press the arrow
buttons to set an IN and OUT point in the clip, it
becomes possible to copy the section defined by the IN
and OUT points.
On how to set an IN and OUT point, see "To copy the
specified part of a clip" (page 56).
5
Press the COPY button.
The Clip Copy screen appears.
An example of Clip Copy screen display when copying
from SxS memory card to internal storage
To change the copy source clip
Press the RETURN button to return to the clip list
screen, and then select another clip.
To cancel the copy operation
Press the CANCEL function (F6) button.
6
Press the SOURCE function button (F1) and select
"SELECTED", "ALL", or "PARTIAL".
To copy the clips selected in step 4: Select
"SELECTED".
To copy all the clips on the SxS memory card:
Select "ALL".
To copy part of the clip selected in step 4: Proceed
to step 7 without pressing the SOURCE function
button (F1).
7
If you selected the SxS memory card as the copy
source in step 3, press the function button (F2) and
select the combination of media as copy source and
internal storage as copy destination.
8
Press the START function (F5) button.
Copying of the clips starts.
The progress of the copying is shown in the Clip Copy
screen, and the copy icon lights in the status display
area.
To turn off the display of copy processing progress
Press the DISP OFF function button (F6).
To perform an internal storage operation during
copy execution
Press INTERNAL button to switch to the internal
storage screen.
The progress of copy processing is not shown in the
internal storage screen. To show the progress of copy
processing, press the COPY button. To hide the
display of copy processing progress, press the DISP
OFF function button (F6).
To abort the copy operation
Press the ABORT function button (F1), or
alternatively press the COPY button and then press the
RESET button.
The data having already been transferred to the
destination media remains on that media.
If the copy operation is completed successfully, the
message "Copy was successful." appears.
9
Press the OK function (F5) button.
The Clip Copy screen disappears, and you return to the
original screen.
To delete clips/files on the SxS memory card
You cannot delete clips/files from an SxS memory
card currently loaded in this unit.
55
Copying