Selecting A Clip Or An Edl; Playback Operation - Sony XDS-PD1000 Operation Manual

• In the case of quad-layer WO discs, the playback
position is not saved.
After recording
The unit stops at the position where recording ended.
To play back a clip, press the PREV button to move to the
start frame of any clip or press the PREV button with the
PLAY button held down to move to any position.
After playback stops
When you press the STOP button, playback stops at that
position and the position is saved.
When you press the PLAY button, playback starts from the
stopped position.
1080/720 cross convert function
You can output 720 while playing clips recorded as 1080,
and output 1080 while playing clips recorded as 720.
When the system frequency of clips (59.94i/59.94P/
29.97P, or 50i/50P/25P) matches the system frequency of
the unit, but the number of system line settings (1080 or
720) do not match, then clip playback is cross converted
automatically.
SD up convert function
You can output HD while playing discs recorded as SD.
HD down convert function
You can always output SD while playing clips recorded as
HD.
Pulldown playback
When this unit's system frequency is set to 1080/59.94i,
1080/29.97P, or 720/59.94P, clips recorded as 1080/
23.98P are converted by 2-3 pulldown before playback
(pulldown playback).
Timecode in pulldown playback
During pulldown playback, timecode is also converted to
30-frame timecode to match the output video signals.
The upper row of the time data display area displays the
original 24-frame timecode, and the lower row displays the
30-frame timecode.
TC VITC
00:59:59:23
PDT 00:59:59:29
You can superimpose the 30-frame timecode after
pulldown on an external monitor. To do so, set setup menu
item 005 DISPLAY INFORMATION SELECT to "time
data only".
TCR 00:59:59:23
PDT 00:59:59:29

Selecting a clip or an EDL

DISPLAY button
1
Press the PB PORT button in the basic operation
screen or video monitor screen.
2
Select the media.
To select clips/EDLs on the internal storage: Press
the INTERNAL button.
To select clips/EDLs on the Professional Disc: Press
the DISC button.
3
Press the THUMBNAIL button.
The clip list screen (details view) of the the media
selected in step 2 appears.
To switch the clip list screen to the thumbnails view
Press the DISPLAY button.
4
Do one of the following to select the clip/EDL that you
want to play.
• Turn the PUSH SET knob.
• Press the arrow buttons.
5
Press the PUSH SET knob.
The selection of the target clip/EDL is confirmed.

Playback operation

This section describes the following types of playback:
Normal playback: Playback at normal speed
Playback in jog mode: Variable-speed playback, with the
speed determined by the speed of turning the jog dial
Playback in shuttle mode: Variable-speed playback, with
the speed determined by the angular position of the
shuttle dial
Playback in variable-speed mode: Variable-speed
playback, with the speed finely determined by the
angular position of the shuttle dial
51
Playback