Connections For Cut Editing - Sony XDS-PD1000 Operation Manual

Connections for cut editing

The following figure shows a cut editing system
comprising this unit as a player.
When using an
BVE-700/700A
The following figure shows a cut editing system
comprising this unit as a player, an HDW-M2000/M2000P
HD video monitor
HDW-M2000/M2000P
(recorder)
HD video monitor
Settings on each unit
Device
HDW-M2000/M2000P (recorder)
BVE-700/700A (editing control unit)
This unit (player)
32
Connections and Settings
editing control unit
To HD-SDI input connector
To HD-SDI input
connector
Settings
• REMOTE 1 (9P) button: Lit
• REF.VIDEO INPUT connector 75 Ω termination switch: OFF
• Audio selection function switching button
INPUT button: HDSDI
• Function menu HOME >F1 (VID. IN): SDI
• Function menu page 1 >F1 (TCG): INT
• Function menu page 1 >F2 (PR/RGN): PRESET
• Function menu page 1 >F3 (RUN): FREE
• SYNCHRONIZE menu: OFF
• VTR constants (see below)
• Setup menu item 208 PROTOCOL FOR REMOTE(9P): VTR
• REMOTE button (for playback port): Lit
When making the connections, also refer to the manuals
provided with the equipment to be connected.
unit as a recorder, and a BVE-700/700A as an editing
control unit.
BVE-700/700A
(editing control unit)
1: 75 Ω coaxial cable (not supplied)
2: 9-pin remote control cable (not supplied)
Reference video signal
This unit (player)