Speed Dial Key Numbering - NEC DT700 User Manual

Speed Dial Key Numbering

Figure 5.89 DT730 (ITL-32D) Speed Dial Key Numbering
5-110
A D V A N C E D P H O N E F E A T U R E S
Speed Dial and Programmable Keys
D T 7 1 0 ( I T L - 2 E ) S P E E D D I A L C O N F I G U R A T I O N
In the case of the ITL-2E there are is only one Programmable Key. The key on the left
is the Line Key and the key on the right is the programmable Speed Dial Key. The
Speed Dial Key is programmed by your system administrator.
D T 7 1 0 ( I T L - 6 D E ) A N D D T 7 3 0 ( I T L - 1 2 D , I T L - 2 4 D A N D I T L -
3 2 D ) S P E E D D I A L C O N F I G U R A T I O N
All programmable keys not used as Line Keys can be configured as Speed Dial Keys.
Each Speed Dial Key can be configured with a number and optional name. The
number may be a star code.
The programmed digits associated with the Speed Dial Key are dialed "as is"
Note:
by the DT700 and are not be subject to parsing or control by the DT700 local
Digit Map. The SIP server interprets the digits. This allows for arbitrary dial
strings (including star codes) to be defined as a Speed Dial.
Speed Dial Key numbering starts at number 2 with the first Programmable Key on the
DT700 phone. If that Programmable Key is not programmed as a Line Key, it can be
programmed as Speed Dial Key number 2. If the first available Programmable Key is
programmed as a Line Key, then the next available programmable key can be
programmed as Speed Dial Key number 3, etc.
For details on the Speed Dial Key numbering for each phone, see the examples
below.
2 3
7 8 9
13 14 15
19 20 21
4 5 6
10 11 12
16 17 18
22 23 24
25
26
27
28
29
30
31
32
DT700 User Manual