To Make Calls With Your Headset; To Answer Calls With Your Headset - NEC DT700 User Manual

To make calls with your headset

1
2
3
4
Figure 4.20 Headset icon and Headset Soft Key
5

To answer calls with your headset

1
Figure 4.21 Answer key
2
Figure 4.22 Headset icon and Headset Soft Key
4-60
B A S I C P H O N E O P E R A T I O N
DT700 Basic Call Operation
You cannot attach a headset to DT710 (ITL-2E) phones.
Note:
If you are using a headset, it is assumed that the telephone handset it in the on-hook
position when you are making calls.
Press the Speaker key or the NewCall Soft Key to receive dial tone.
Enter the telephone number.
Press the Dial Soft Key to initiate the call, or wait a few seconds for the call to be
automatically dialed.
You can also dial the number, then press the Headset Soft Key to initiate a call.
Note:
A Headset icon displays on the LCD along with the call information.
If you want to transfer the call to your telephone handset, pick up the telephone handset
to continue the call. If you want to transfer back to the headset, press the
Headset Soft Key, then place the telephone handset back on-hook.
While you are on a call, if you press the Headset Soft Key while the telephone
Note:
handset is on-hook, your call will be dropped. Make sure you pick up the
telephone handset to continue your call before you press the
Headset Soft Key.
If you are using a headset, it is assumed that the telephone handset it in the on-hook
position when you are answering calls.
While the telephone is ringing, press the Answer key.
A Headset icon displays on the LCD along with the call information.
DT700 User Manual