Hold/Resume A Call; To Hold/Resume A Call; Using A Headset To Make And Receive Calls - NEC DT700 User Manual

Figure 4.17 Redial from Cursor Pad for DT710 (ITL-6DE) and DT730 (ITL-

To hold/resume a call

1
Figure 4.18 Hold Key
2
Figure 4.19 Call on Hold and Resume Soft Key
DT700 User Manual
12D, ITL-24D and ITL-32D) phones
H O L D / R E S U M E A C A L L
While on a call, press the Hold key to place the call on hold.
If the SIP server supports music-on-hold, the other party hears music-on-hold.
To resume the held call, press the Hold key, or press the Resume Soft Key.
• DT710 (ITL-6DE) Phones: Oh hold duration is displayed in MM:SS format for the
first hour, and then HH:MM for the remainder of the call. The maximum duration is
99:59:59.
• DT730 (ITL-12D, ITL-24D and ITL-32D) Phones: Oh hold duration is displayed in
HH:MM:SS format. The maximum duration is 99:59:59.
During a held call, you can dial another party by pressing the
Note:
NewCall Soft Key, which provides dial tone.
If you have problems reconnecting to a call after it is put on hold, press the EndCall
Soft Key to terminate the call.
U S I N G A H E A D S E T T O M A K E A N D R E C E I V E C A L L S
If you have a headset attached to your phone and your phone has been configured
for the headset (see "To enable an external headset" on page 3-41), you can either
use the telephone handset or your headset when you make and receive calls.
B A S I C P H O N E O P E R A T I O N
DT700 Basic Call Operation
4-59