NEC DT700 User Manual page 47

Figure 2.19 Mount hanger piece
3
4
5
Figure 2.20 Wall Mount Install
6
Figure 2.21 Wall Mount Install
7
DT700 User Manual
Hanger piece
Phone
Turn the phone upside down, and flatten the tilt leg and stopper, or remove the tilt leg
(see "To remove tilt leg" on page 2-26).
Attach the wall mount to the wall directory or the wall plate.
When attaching the wall mount unit directly to the wall:
Secure the wall mount unit with the six screws (included with the phone) or hang the
wall mount unit on the wall with two screws, inserted into the wall.
Wall
WM-L
Unit
Screws
(supplied)
When attaching wall mount unit to the wall plate:
Attach wall mount unit to posts on the wall plate as shown in the figure below.
Switch
box
Posts
Insert the four tabs on the wall mount unit in the tab slots on the back of the phone.
Wall
Screws
WM-L Unit
I N S T A L L A T I O N
WM-L Unit
2-35