Pick-Up Roller - Epson Artisan 700 Service Manual

Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
Never touch or damage the surface of the LD Roller as doing so can
C A U T I O N
adversely affect print quality.
5. Slide the LD Roller in the direction of the arrow and pull out the Section A of
the shaft from the Base Frame, then remove the LD Roller by pulling out the
other side of the shaft from the Base Frame.
Rear side
Base Frame
Figure 4-101. Removing the LD Roller (5)
Make sure to align the dowels (x4) on the Base Frame with the
positioning holes (x4) when reassembling the Rear Paper Guide
Assy. (See Fig. 4-100.)
When replacing the LD Roller, make sure to carry out the specified
A D J U S T M E N T
R E Q U I R E D
lubrication. (See Chapter 6
DISASSEMBLY/ASSEMBLY
Section A
LD Roller
"MAINTENANCE".)
Disassembly Procedures

4.2.4.10 Pick-up Roller

Parts/Components need to be removed in advance:
Cassette Unit
Removal procedure
So as to make description easier, the printer in the photographs is
C A U T I O N
placed vertically in the following steps. Be careful about ink spilling
if the printer is tilted in practical operation.
1. Release the hook (x1), and remove the Pick-up Roller Shaft Bush and Pick-up
Roller Transmission Shaft.
Pick-up Roller Shaft Bush
Pick-up Roller
Transmission Shaft
Figure 4-102. Removing the Pick-up Roller (1)
Revision C
Pick-up Roller
Hook
143
Confidential