Epson Artisan 700 Service Manual page 127

Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
Attach the Grounding Plate A between the Main Frame and
Base Frame. (See
When installing the Grounding Plate B, attach the hook of it to
the hole of the Base Frame, and place it over the Main Frame.
(See Fig. 4-106, Fig.
Grounding Plate A
Figure 4-107. Attaching the Grounding Plate
Align the positioning holes (x6) of the Main Frame with the
dowels (x6) of the Base Frame. (See
Tighten the screws in the order shown in
For routing the cables, see
DISASSEMBLY/ASSEMBLY
Fig. 4-106, Fig. 4-107.)
4-107.)
Grounding Plate B
Hook and hole
Fig. 4-106)
Fig. 4-106.
4.4 "Routing FFC/cables"
When installing the Main Frame, be careful not to let it hit the
Base Frame. If the EJ Release Frame Assy L hits the Base
Frame (see
the operation defect.
(p202).
Tighten the screws in the order shown in
For routing the cables, see
After removing the Main Frame, make the specified adjustments.
A D J U S T M E N T
R E Q U I R E D
(See Chapter 5
Disassembly Procedures
Fig. 4-113), the gear will come off, which may cause
Do not let it hit here.
Base Frame
Figure 4-108. Installing the Main Frame
Fig.
4.4 "Routing FFC/cables"
"ADJUSTMENT".)
Revision C
4-106.
(p202).
146
Confidential