Epson Artisan 700 Service Manual page 176

Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
3. Tilt the Panel Unit by 45 degrees to align the rib of the shaft on the left side of
the Panel Unit with the groove of the Upper Housing.
Groove of the
Upper Housing
Rib of the shaft
Figure 4-227. Removing the Panel Unit (2)
4. Lift the Panel Unit so as not to let the Right Hinge interfere with the Upper
Housing, and remove the shaft from the bushing on the left side of the Panel
Unit, and then remove the Panel Unit.
Bushing
Panel Unit
Figure 4-228. Removing the Panel Unit (3)
DISASSEMBLY/ASSEMBLY
After replacing the Panel Unit, be sure to perform the required
A D J U S T M E N T
R E Q U I R E D
lubrication. (See
Right Hinge
195
Chapter 6 "MAINTENANCE".)
Revision C
Confidential