Chapter 1 Outline; Outline - Fujitsu ETERNUS DX100 S3 Setup Manual

Chapter 1

Outline

This chapter describes the outlines, features, operating environment, user management function, and
operation screens for GUI.
GUI is installed in controllers of the ETERNUS DX, and used for performing settings and maintenance via web
browser.
1.1 Outline
Use GUI to set the operating environment and check status for the ETERNUS DX.
GUI can be operated from a web browser by connecting the PC via a LAN connection.
Figure 1.1 Outline of GUI
LAN
Management Server
Mail Server Program
*1: Connect the operation server and the ETERNUS DX with one of the following cables:
Fibre Channel (FC) cable
LAN cable
SAS cable (available only for the ETERNUS DX100 S3/DX200 S3)
Refer to "Chapter 2 Startup and Shutdown" (page 19)
Operation
(*1)
Server
ETERNUS DX100 S3/DX200 S3
ETERNUS DX500 S3/DX600 S3
ETERNUS DX200F
PC
W eb Browser
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED
GUI
Operating via
web browser
for details of GUI start up.
12
P2X0-1250-06ENZ0