Fujitsu ETERNUS DX100 S3 Setup Manual page 38

Chapter 3 Initial Setup
3.2 Initial Setup 2
4
Proceed to [Setup SNMP Agent Basic Interface].
4-1
Specify the parameters.
The main setting items are as follows.
-
-
-
-
-
Click the [Skip] button to proceed to the next screen without setting.
4-2
Click the [Next >>] button.
 A confirmation screen appears.
4-3
Click the [OK] button.
 Setting of the SNMP Agent basic starts.
4-4
Click the [Done] button.
SNMP Function
LAN Port used for SNMP
Authentication Failure
Engine ID
MIB-II RFC Version
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED
38
P2X0-1250-06ENZ0