Fujitsu ETERNUS DX100 S3 Setup Manual page 98

Chapter 5 Host Interface Management
5.6 Create Host Affinity
5
Select a CA port group to configure a host affinity, and click the [OK] button.
 The display returns to the initial screen.
• If a specific host group has been selected in the "Host Group" field, CA ports for which the affinity
mode is "OFF" are not displayed.
• If "All" has been selected in the "Host Group" field, CA ports with any of the following conditions are
not displayed:
-
-
-
6
Click the [Browse...] button for the LUN group.
 The [Select LUN Group] screen appears.
The affinity mode is "ON"
The CA port is used in the CA port group
The CA port group is used by another host affinity
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED
98
P2X0-1250-06ENZ0