Appendix C
Estimated Advanced Copy Source Capacity
This appendix describes the maximum usable Advanced Copy size.
The maximum copy source capacity for each copy type is shown in the table below.
The estimated values in the following tables are examples of typical Advanced Copy sessions (the maximum
memory area required for Advanced Copy management is secured and the number of copy sessions is 400).
Actual values can be calculated by using the procedure in "How to calculate the copy table size" of "Modify
Copy Table Size" in "ETERNUS Web GUI User's Guide (Settings)".
When performing EC/REC (*1) and OPC/QuickOPC/SnapOPC/SnapOPC+ without OPC Restoration
Model
ETERNUS DX100 S3/
DX200 S3
ETERNUS DX200F
(Table size = 512MB)
ETERNUS DX500 S3
(Table size = 1024MB
(1GB))
ETERNUS DX600 S3
(Table size = 4096MB
(4GB))
*1:
REC is available for the ETERNUS DX200 S3/DX500 S3/DX600 S3 and the ETERNUS DX200F.
× 1
× 2
32568
65136
(31.8)
(63.6)
65336
130672
(63.8)
(127.6)
261944
523888
(255.8)
(511.6)
126
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED
Resolution
× 4
× 8
130272
260544
(127.2)
(254.4)
261344
522688
(255.2)
(510.4)
1047776
2095552
(1023.2)
(2046.4)
(Using 1TB=1,024GB Decimals rounded off at the second place)
(Unit: GB (TB))
× 16
× 32
× 64
521088
1042176
2084352
(508.8)
(1017.7)
(2035.5)
1045376
2090752
4181504
(1020.8)
(2041.7)
(4083.5)
4191104
8382.208
16764.416
(4092.9)
(8185.8)
(16371.5)
P2X0-1250-06ENZ0