Fujitsu ETERNUS DX100 S3 Setup Manual page 36

Chapter 3 Initial Setup
3.2 Initial Setup 2
The procedure to perform Initial Setup 2 is as follows:
Procedure
1
Click [Initial Setup] in [Action].
• When logging in again after Initial Setup 1 is complete, the [Initial Setup 2] screen appears.
• If all of the settings of Initial Setup 2 are not performed, click the [All Skip] button to exit the Initial
Setup wizard.
2
Click the [Next >>] button.
 Initial Setup restarts.
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED
36
P2X0-1250-06ENZ0