Oob Ip Route - Fujitsu XG0224 User Manual

XG Series User's Guide
5.5.5.2

oob ip route

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Default
Set the IPv4static route information
XG2600
oob ip route <count> <address>/<mask> <next_hop> [<distance>]
<count>
• Static route information definition number
Specify a static route information definition number with a decimal value.
Range
0 to 199 XG2600
<address>/<mask>
• IPv4 address/number of mask bits (or mask value)
Specify a destination network with a combination of the IPv4 address and the number
of mask bits. For the mask value, specify successive 1s following the most significant
bit (MSB). The available description format is as follows:
- IPv4 address/number of mask bits (Example: 192.168.1.0/24)
- IPv4 address/mask value (Example: 192.168.1.0/255.255.255.0)
• default
Specify default when the default route is set as a destination network.
It's same as specifying 0.0.0.0/0(0.0.0.0/0.0.0.0)
<next_hop>
• IPv4 address of next hop router
Specify the IPv4 address of the next hop router
<distance>
• Priority
Specify the static route information priority with a decimal value from 1 to 254.
A smallr value has a higher priority.
The default is 1.
Configuration mode (admin class)
Set the IPv4 static route information
Max definition number
200 XG2600
When the same destination as static route is set, be careful about the following.
• Multiple default routes can not be cofigured with the same priority.
N/A
215
Chapter 5 Command Reference
Model
Model
LAN Information Settings